Sindbad~EG File Manager
# SPDX-License-Identifier: GPL-2.0
# Backward compatibility
asflags-y += $(EXTRA_AFLAGS)
ccflags-y += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
# flags that take effect in current and sub directories
KBUILD_AFLAGS += $(subdir-asflags-y)
KBUILD_CFLAGS += $(subdir-ccflags-y)
# Figure out what we need to build from the various variables
# ===========================================================================
# When an object is listed to be built compiled-in and modular,
# only build the compiled-in version
obj-m := $(filter-out $(obj-y),$(obj-m))
# Libraries are always collected in one lib file.
# Filter out objects already built-in
lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
# Determine modorder.
# Unfortunately, we don't have information about ordering between -y
# and -m subdirs. Just put -y's first.
modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
# Handle objects in subdirs
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.a
# and add the directory to the list of dirs to descend into: $(subdir-y)
# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
# and add the directory to the list of dirs to descend into: $(subdir-m)
__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
subdir-y += $(__subdir-y)
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m += $(__subdir-m)
obj-y := $(patsubst %/, %/built-in.a, $(obj-y))
obj-m := $(filter-out %/, $(obj-m))
# Subdirectories we need to descend into
subdir-ym := $(sort $(subdir-y) $(subdir-m))
# if $(foo-objs), $(foo-y), or $(foo-m) exists, foo.o is a composite object
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))), $(m))))
multi-used := $(multi-used-y) $(multi-used-m)
# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.a, $(obj-y))
# Replace multi-part objects by their individual parts,
# including built-in.a from subdirectories
real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
# DTB
# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
extra-y += $(dtb-y)
extra-$(CONFIG_OF_ALL_DTBS) += $(dtb-)
ifneq ($(CHECK_DTBS),)
extra-y += $(patsubst %.dtb,%.dt.yaml, $(dtb-y))
extra-$(CONFIG_OF_ALL_DTBS) += $(patsubst %.dtb,%.dt.yaml, $(dtb-))
endif
# Test self-contained headers
# Wildcard searches in $(srctree)/$(src)/, but not in $(objtree)/$(obj)/.
# Stale generated headers are often left over, so pattern matching should
# be avoided. Please notice $(srctree)/$(src)/ and $(objtree)/$(obj) point
# to the same location for in-tree building. So, header-test-pattern-y should
# be used with care.
header-test-y += $(filter-out $(header-test-), \
$(patsubst $(srctree)/$(src)/%, %, \
$(wildcard $(addprefix $(srctree)/$(src)/, \
$(header-test-pattern-y)))))
extra-$(CONFIG_HEADER_TEST) += $(addsuffix .s, $(header-test-y) $(header-test-m))
# Add subdir path
extra-y := $(addprefix $(obj)/,$(extra-y))
always := $(addprefix $(obj)/,$(always))
targets := $(addprefix $(obj)/,$(targets))
modorder := $(addprefix $(obj)/,$(modorder))
obj-m := $(addprefix $(obj)/,$(obj-m))
lib-y := $(addprefix $(obj)/,$(lib-y))
subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
real-obj-y := $(addprefix $(obj)/,$(real-obj-y))
real-obj-m := $(addprefix $(obj)/,$(real-obj-m))
multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
# Finds the multi-part object the current object will be linked into.
# If the object belongs to two or more multi-part objects, all of them are
# concatenated with a colon separator.
modname-multi = $(subst $(space),:,$(sort $(foreach m,$(multi-used),\
$(if $(filter $*.o, $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m))),$(m:.o=)))))
modname = $(if $(modname-multi),$(modname-multi),$(basetarget))
# These flags are needed for modversions and compiling, so we define them here
# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
# end up in (or would, if it gets compiled in)
name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
modname_flags = -DKBUILD_MODNAME=$(call name-fix,$(modname))
orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
orig_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
$(asflags-y) $(AFLAGS_$(basetarget).o)
_a_flags = $(filter-out $(AFLAGS_REMOVE_$(basetarget).o), $(orig_a_flags))
_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
#
# Enable gcov profiling flags for a file, directory or for all files depending
# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
# (in this order)
#
ifeq ($(CONFIG_GCOV_KERNEL),y)
_c_flags += $(if $(patsubst n%,, \
$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
$(CFLAGS_GCOV))
endif
#
# Enable address sanitizer flags for kernel except some files or directories
# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
#
ifeq ($(CONFIG_KASAN),y)
_c_flags += $(if $(patsubst n%,, \
$(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
$(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
endif
ifeq ($(CONFIG_UBSAN),y)
_c_flags += $(if $(patsubst n%,, \
$(UBSAN_SANITIZE_$(basetarget).o)$(UBSAN_SANITIZE)$(CONFIG_UBSAN_SANITIZE_ALL)), \
$(CFLAGS_UBSAN))
endif
ifeq ($(CONFIG_KCOV),y)
_c_flags += $(if $(patsubst n%,, \
$(KCOV_INSTRUMENT_$(basetarget).o)$(KCOV_INSTRUMENT)$(CONFIG_KCOV_INSTRUMENT_ALL)), \
$(CFLAGS_KCOV))
endif
# $(srctree)/$(src) for including checkin headers from generated source files
# $(objtree)/$(obj) for including generated headers from checkin source files
ifeq ($(KBUILD_EXTMOD),)
ifdef building_out_of_srctree
_c_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
_a_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
_cpp_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj)
endif
endif
c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
-include $(srctree)/include/linux/compiler_types.h \
$(_c_flags) $(modkern_cflags) \
$(basename_flags) $(modname_flags)
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
$(_a_flags) $(modkern_aflags)
cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
$(_cpp_flags)
ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))
DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes
dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
$(addprefix -I,$(DTC_INCLUDE)) \
-undef -D__DTS__
# Useful for describing the dependency of composite objects
# Usage:
# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
define multi_depend
$(foreach m, $(notdir $1), \
$(eval $(obj)/$m: \
$(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
endef
# LEX
# ---------------------------------------------------------------------------
quiet_cmd_flex = LEX $@
cmd_flex = $(LEX) -o$@ -L $<
$(obj)/%.lex.c: $(src)/%.l FORCE
$(call if_changed,flex)
# YACC
# ---------------------------------------------------------------------------
quiet_cmd_bison = YACC $@
cmd_bison = $(YACC) -o$@ -t -l $<
$(obj)/%.tab.c: $(src)/%.y FORCE
$(call if_changed,bison)
quiet_cmd_bison_h = YACC $@
cmd_bison_h = $(YACC) -o/dev/null --defines=$@ -t -l $<
$(obj)/%.tab.h: $(src)/%.y FORCE
$(call if_changed,bison_h)
# Shipped files
# ===========================================================================
quiet_cmd_shipped = SHIPPED $@
cmd_shipped = cat $< > $@
$(obj)/%: $(src)/%_shipped
$(call cmd,shipped)
# Commands useful for building a boot image
# ===========================================================================
#
# Use as following:
#
# target: source(s) FORCE
# $(if_changed,ld/objcopy/gzip)
#
# and add target to extra-y so that we know we have to
# read in the saved command line
# Linking
# ---------------------------------------------------------------------------
quiet_cmd_ld = LD $@
cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@
# Archive
# ---------------------------------------------------------------------------
quiet_cmd_ar = AR $@
cmd_ar = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(real-prereqs)
# Objcopy
# ---------------------------------------------------------------------------
quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
# Gzip
# ---------------------------------------------------------------------------
quiet_cmd_gzip = GZIP $@
cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
# DTC
# ---------------------------------------------------------------------------
DTC ?= $(objtree)/scripts/dtc/dtc
# Disable noisy checks by default
ifeq ($(findstring 1,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
DTC_FLAGS += -Wno-unit_address_vs_reg \
-Wno-unit_address_format \
-Wno-avoid_unnecessary_addr_size \
-Wno-alias_paths \
-Wno-graph_child_address \
-Wno-simple_bus_reg \
-Wno-unique_unit_address \
-Wno-pci_device_reg
endif
ifneq ($(findstring 2,$(KBUILD_ENABLE_EXTRA_GCC_CHECKS)),)
DTC_FLAGS += -Wnode_name_chars_strict \
-Wproperty_name_chars_strict
endif
DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB $@
cmd_dt_S_dtb= \
{ \
echo '\#include <asm-generic/vmlinux.lds.h>'; \
echo '.section .dtb.init.rodata,"a"'; \
echo '.balign STRUCT_ALIGNMENT'; \
echo '.global __dtb_$(subst -,_,$(*F))_begin'; \
echo '__dtb_$(subst -,_,$(*F))_begin:'; \
echo '.incbin "$<" '; \
echo '__dtb_$(subst -,_,$(*F))_end:'; \
echo '.global __dtb_$(subst -,_,$(*F))_end'; \
echo '.balign STRUCT_ALIGNMENT'; \
} > $@
$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
$(call if_changed,dt_S_dtb)
quiet_cmd_dtc = DTC $@
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
$(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(DTC) -O $(2) -o $@ -b 0 \
$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
$(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
$(call if_changed_dep,dtc,dtb)
DT_CHECKER ?= dt-validate
DT_BINDING_DIR := Documentation/devicetree/bindings
DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.yaml
quiet_cmd_dtb_check = CHECK $@
cmd_dtb_check = $(DT_CHECKER) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ ;
define rule_dtc
$(call cmd_and_fixdep,dtc,yaml)
$(call cmd,dtb_check)
endef
$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
$(call if_changed_rule,dtc,yaml)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
# Bzip2
# ---------------------------------------------------------------------------
# Bzip2 and LZMA do not include size in file... so we have to fake that;
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell \
dec_size=0; \
for F in $(real-prereqs); do \
fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
printf "%08x\n" $$dec_size | \
sed 's/\(..\)/\1 /g' | { \
read ch0 ch1 ch2 ch3; \
for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
printf '%s%03o' '\\' $$((0x$$ch)); \
done; \
} \
)
quiet_cmd_bzip2 = BZIP2 $@
cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9; $(size_append); } > $@
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@
quiet_cmd_lzo = LZO $@
cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@
quiet_cmd_lz4 = LZ4 $@
cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout; \
$(size_append); } > $@
# U-Boot mkimage
# ---------------------------------------------------------------------------
MKIMAGE := $(srctree)/scripts/mkuboot.sh
# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
# the number of overrides in arch makefiles
UIMAGE_ARCH ?= $(SRCARCH)
UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
UIMAGE_OPTS-y ?=
UIMAGE_TYPE ?= kernel
UIMAGE_LOADADDR ?= arch_must_set_this
UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
-T $(UIMAGE_TYPE) \
-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
-n $(UIMAGE_NAME) -d $< $@
# XZ
# ---------------------------------------------------------------------------
# Use xzkern to compress the kernel image and xzmisc to compress other things.
#
# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
# of the kernel decompressor. A BCJ filter is used if it is available for
# the target architecture. xzkern also appends uncompressed size of the data
# using size_append. The .xz format has the size information available at
# the end of the file too, but it's in more complex format and it's good to
# avoid changing the part of the boot code that reads the uncompressed size.
# Note that the bytes added by size_append will make the xz tool think that
# the file is corrupt. This is expected.
#
# xzmisc doesn't use size_append, so it can be used to create normal .xz
# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN $@
cmd_xzkern = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \
$(size_append); } > $@
quiet_cmd_xzmisc = XZMISC $@
cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@
# ASM offsets
# ---------------------------------------------------------------------------
# Default sed regexp - multiline due to syntax constraints
#
# Use [:space:] because LLVM's integrated assembler inserts <tab> around
# the .ascii directive whereas GCC keeps the <space> as-is.
define sed-offsets
's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}'
endef
# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
echo "#ifndef $2"; \
echo "#define $2"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " */"; \
echo ""; \
sed -ne $(sed-offsets) < $<; \
echo ""; \
echo "#endif"
endef
Sindbad File Manager Version 1.0, Coded By Sindbad EG ~ The Terrorists